PRODUCT DESCRIPTION:
The AMIS120XL is an 8 channel, 120 watt mixer amplifier suitable for rack or desk mounting. The amplifier is a self contained compact unit of solid steel construction. This amplifier features a status LED. Inputs The AMIS120XL has eight universal input channels with separate level controls. Each channel will accept balanced or unbalanced microphone, line and auxiliary inputs. The unit has industry standard XLR microphone sockets and dual RCA auxiliary sockets for each channel. Rear panel dip switches per channel allow the adjustment of line input sensitivity. An insert point is also featured on the rear panel for those applications where an additional EQ or Feedback Exterminator may be required. An electronically-balanced 600 ohm telephone input for paging is also provided. Outputs The AMIS120XL features 70 volt, 4 & 8 ohm isolated transformer outputs, plus a tape recorder output by means of dual RCA sockets. A balanced 700mV XLR output is also provided to feed up to 6 power amplifiers. A vox triggered relay output is also available on the rear panel for activation of external devices from the vox muting circuit. In most cases this would be used as a muting bypass relay, which when used with the appropriate external attenuator will maintain paging levels irrespective of the attenuator setting. |
| |
TECHNICAL SPECIFICATIONS:
Power Output 120 watts RMS Maximum Load 40 Ohms @ 70 Volts Power Bandwidth 60Hz - 17kHz (- 3dB) Frequency Response 60Hz - 23kHz (- 3dB) Total Harmonic Distortion 0.5% @ 1KHz rated power Signal To Noise Ratio -74dB with all controls at their centre position Tone Controls Bass @ 100Hz: Boost +12dB Cut -12dB; Mid @ 600Hz: Boost +12dB Cut -12dB; Treble @ 10kHz: Boost +9dB Cut -9dB Inputs Eight mic/aux universal inputs with XLR female mic sockets and dual RCA Phono aux sockets; 600 ohm transformer balanced telephone paging input Input Sensitivity Mics: 1mV @ 200 Ohms; Aux: 150mV @ 47K Ohms with selectable 9, 12, 15dB Pads Outputs Speaker: 70 Volts, 4 & 8 Ohms; Tape: 350mV @ 10K Ohms; Line: Balanced 700mV Phantom Power 18 Volts DC on all Mic inputs (dip switch per channel) Controls 8 Input channel gain controls, 1 Bass control, 1 Mid Control, 1 Treble control, 1 Master gain control, VCA rear panel strip, Dip Switch per Channel for line sensitivity and phantom power and a vox relay ouput on the rear panel. |
| |
WEIGHT (KG) Unless stated otherwise:
26.5LBs |
| |
DIMENSIONS (W x H x D) (MM) Unless stated otherwise:
3.5 |